Condensate Pump Running Continuously: Possible Reasons and How to Fix

We cover everything you need to know, from how it works to solving the problem and safety precautions.
By
reviewed
Reviewed by
Last updatedLast updated: October 10, 2021
House Weather is reader-supported. We may earn a commission through products purchased using links.

Not creating a route where water can exit your air conditioner or humidifier will cause major problems. The water drips on the floor, which, for example, can be dangerous if you have kids or electronics around. Luckily, a condensate pump solves that problem.

It sends water into your thermostat, thereby regulating its temperature. That water is converted into steam which cools down into acidic water that’s returned to the condensate pump.

However, what happens when a condensate pump runs nonstop? Not to worry, there are a couple of ways to fix a condensate pump running continuously without inviting a professional, and we will walk you through it shortly.

How a Condensate Pump Works

Condensate Pump Running Continuously: Possible Reasons and How to FixRemember those traditional window AC units we had in our parent’s house. These rectangular Air conditioners were installed outdoor and dripped buckets of water. If you’ve seen one of those, you will realize that continuous dripping will mess up your house, especially if the Air conditioner is kept indoor. This is where a condensate pump becomes useful.

The job of a condensate pump is to extract condensation from your HVAC system – this could be a dehumidifier or Air conditioner. After a while, this condensation cools down and turns into moisture. Without a pump attached to your HVAC at home, you would have your indoor space flowing with water.

But why does the water need to be condensed in the first place? Well, it’s simple. The temperature of your AC heats up during the summer. The condensate pump sends water into the system to regulate its temperature. As its temperature drops, it produces steam which transforms to water when it cools down.

This contaminated water flows back to the condensate pump and is evacuated into drainage or an underground passage. The water sent into the HVAC system by the pump is often cleaner than the one coming through the outlet.

If no route is provided for the escape of this liquid, it drips on the ground and wets the floor. Unfortunately, this isn’t healthy since this water is acidic.

For a condensate pump to function well, it should be able to pump water into the HVAC system and, at the same time, provide a convenient route for the condensed steam to return to the pump.

A typical condensate pump is made of a motor and an impeller. The motor is responsible for forcing water up to HVAC to regulate its temperature. A discharge line serves as the exit route and is connected to a ground storage.

If every condition is met, a condensate pump will continue to work when there’s a need to regulate the temperature of your thermostat.

However, if your condensate pump won’t shut off, several things might be behind it. The next section provides some common reasons why your condensate pump might not shut off and how to troubleshoot this

Possible Reasons Why a Condensate Pump Won’t Shut Off

If you find your heat pump running constantly, there are possible factors responsible for it. In forums, we’ve seen questions such as “why is my condensate pump running continuously and what can I do to stop it.”

Well, if this is the case, you will be glad to know that some of these issues can be sorted out without inviting a professional. From experience, here are some of the reasons your heat pump might refuse to shut down.

Wrong Thermostat Setting

Condensate Pump Running Continuously: Possible Reasons and How to FixThe configuration of the thermostat will determine how the heat pump works. In the summer, it’s common for us to set our thermostat to a high level to cool off the room Trusted Source www.bbc.com . Well, this means the heat pump will continue running as it aims to regulate the temperature of the thermostat. However, if this isn’t the case, ensure your heat pump isn’t mistakenly set to the “emergency heat note.” This is why you should cross-check its setting before putting it on.

Air Filter Clogged

For your pump to run smoothly, proper airflow is needed. The filters can’t be clogged; otherwise, fresh air will be prevented from coming in. Hence, the heat pump Trusted Source At home with a heat pump: ‘It makes hot water when it’s freezing outside’ | Energy bills | The Guardian Four householders with recently installed air source heat pumps discuss the ups and downs of ownership www.theguardian.com will run continuously when the air filter is clogged. If you sense that the filter is clogged, ensure you call a repairer to come in and fix the problem. Most of the time, a replacement will be needed. However, if you carry out periodic maintenance checks, the problem will be detected early on.

Failed Check Valve

Condensate Pump Running Continuously: Possible Reasons and How to FixThe check valve is a part of the disposal hose and might cause issues if it gets damaged. This is because damage to this part makes it difficult for water to exit into the drainage. Rather, it will be cycled back to the pump, which causes it to run continuously.

It’s difficult to detect a check valve issue. However, one of the likeliest clues is if the water level of the pump climbs up after the condensate heat pump has been shut down.

The Discharge Line

The check valve can be in order, and your condensate pump will still be working incessantly. Well, if that’s the case, you will have to run a thorough check on the discharge line. The discharge line is a flexible tube that connects the condensate pump to drainage.

If water is continuously getting held in the discharge line, it might cause the problem of a running pump. You want to ensure nothing clogs the discharge pump, which might prevent the water from exiting. If that’s the case, you will have to empty the content in the discharge line into a bucket to troubleshoot it.

How to Fix a Constantly Running Condensate Pump

Below are recommendations on how to fix a constantly running condensate pump, depending on the reason, and some way to prevent it from happening in future.

Fixing a Discharge Line

If water is trapped in your discharge line, you will have to empty its content by unplugging the condensate pump. You will have to pull out the discharge line with a hose clump before emptying the water into a bucket.

Once the water is emptied from the drain line, you can blow in some air into the discharge line to see if there’s any object clogging it.

Fixing the Check Valve

The check valve and the discharging line somehow works hand in hand. Most of the time, when water is trapped in the discharge line, the check valve ensures the water doesn’t return to the condensate pump. This way, it turns the pump back on, prompting it to work endlessly.

To rectify the check valve, you will have to unscrew the condensate pump, especially if it’s screwed to a wall. Because of the strenuous task involved, we advise you to let a professional handle this task.

The handyman will remove the compensate pump from the wall and fill the inlet hole with water before fixing it to a GCFI outlet. The pump will send the water out of the check valve with some strong wave of current.

Water Won’t Float Out

Condensate Pump Running Continuously: Possible Reasons and How to FixIf you notice water exiting the condensate pump at a steady rate, it means the inlet hole isn’t clogged. However, if the water is stuck, it means the inside of the condensate pump is clogged. However, if you don’t see anything after checking the inside of the pump, likely, the pump isn’t fit for the discharge line you’re using. For this, a powerful pump needs to be purchased so the water can be emptied at a faster rate.

Carry Out Periodic Cleaning

It’s important to clean every part of your condensate pump heater in addition to the valves. Over time, debris and algae might clog the discharge line. Once in a while, ensure the valves are removed and cleaned before re-installing. This minimizes clogging issues.

Safety Precautions

Almost every hardware experience faults from consistent usage, and the condensate pump machine isn’t exempted. As a general rule, frequent checks and maintenance help you nick any issue in the bud. Some of the most likely challenge users of this type of machine complain about is clogged valves, slow water discharge and pumps running continuously.

To minimize these problems, here are some precautions to put in mind when using a condensate pump.

  • Disconnect the pump from a power switch before carrying out any checks
  • Ensure the power pump is compatible with the discharge line. For discharge lines that are 15 feet, a small-sized pump will be too slow in discharging water.
  • Ensure the switch wiring is closed to prevent pump overflow. However, any electrical issue that will require wire cutting should be left to a professional
  • Always check the valves monthly to clean out debris, algae, or sand that might clog the space.

Final Thoughts

We hope after reading this when next you find your condensate pump running continuously, you should be able to identify the problem and solve it. Periodic maintenance should be conducted to ensure your pump is always in good condition. This way, you don’t have to call a repairer all the time, and the life expectancy of your machine will be prolonged.

When it comes to compatibility, it’s always important to consider the height of the discharge line. Gravity influences how quickly water runs to the top of the pump and how fast it travels down. The longer the discharge line, the more power your pump needs to employ to get water down.

References

2.
At home with a heat pump: ‘It makes hot water when it’s freezing outside’ | Energy bills | The Guardian
Four householders with recently installed air source heat pumps discuss the ups and downs of ownership
Leave a Reply

Your email address will not be published. Required fields are marked *